Repairing the Back and Front Sliding Glass Doors

Russco’s Glazing Repairs Front and Back Sliding Glass Doors at Commercial Business in Paget, QLD

When the owners of a busy commercial business in Paget, Queensland, began experiencing issues with their front and back sliding glass doors, they called on Russco’s Glazing to carry out professional repairs. The doors, which served as both customer entry and staff access points, had become increasingly difficult to open and close. This not only caused inconvenience but also created a potential safety concern for employees and clients.

After inspecting both sliding doors, Russco’s Glazing identified worn rollers and deteriorated mohair seals as the main causes of the problem. To restore smooth operation and improve the overall performance of the doors, the team replaced the old rollers with Comalco sliding glass door rollers and installed new mohair seals.

The end result was two sliding doors that glided effortlessly, provided better sealing against drafts and dust, and looked as good as new.

Client Concerns and Initial Assessment

The business had been operating from its Paget premises for several years, and both the front reception entry door and rear staff access door were high-traffic entry points. Over time, staff noticed the doors had become harder to slide, requiring more force to open and close.

This is a common issue in commercial environments where doors are used frequently throughout the day. Constant movement places stress on the rollers and tracks, eventually leading to wear and reduced efficiency.

When Russco’s Glazing attended the site, the inspection revealed two main issues:

1. Worn Rollers: The existing rollers were showing significant wear, causing the doors to drag slightly on the bottom track. This not only made them difficult to operate but also risked damaging the aluminium track if left unchecked.
   
   
2. Worn Mohair Seals: The mohair (the soft brush-like seals around the frame) had flattened and deteriorated over time. These seals play a crucial role in reducing air leaks, dust entry, and vibration noise.
   
   

The client wanted both doors restored to full working order quickly, without the need for complete replacement.

The Repair Solution

Russco’s Glazing recommended replacing the old rollers with Comalco sliding glass door rollers, a trusted and durable option widely used in commercial-grade aluminium sliding doors. These rollers are designed to handle heavier glass panels while providing smooth, quiet operation.

In addition to the rollers, the team would also replace the sliding door mohair seals. New mohair strips ensure that when the doors are closed, they form a tight seal against drafts and dust, an important consideration for businesses in industrial areas such as Paget, where airborne dust can be an ongoing issue.

This combination of roller and mohair replacement would restore both the functionality and longevity of the doors, improving ease of use and maintaining the professional appearance of the building.

Repair Process

The Russco’s Glazing team carried out the work efficiently to minimise disruption to the business’s daily operations.

1. Door Removal and Inspection
   Each door was carefully lifted from its track and laid securely on padded supports. This allowed the technicians to safely access the underside of the frame, where the rollers are housed.
   
   
2. Removal of Old Rollers
   The worn rollers were removed and inspected. As expected, the bearings had become stiff with age and debris buildup, contributing to the doors’ poor movement.
   
   
3. Installation of Comalco Rollers
   New Comalco sliding glass door rollers were installed. These high-quality components are made with corrosion-resistant materials, ideal for Queensland’s humid climate, and are designed for long-term durability and smooth performance.
   
   
4. Track Cleaning and Lubrication
   Before reinstalling the doors, the team thoroughly cleaned the aluminium tracks to remove dust and grit that could hinder movement. The tracks were then lightly lubricated to allow optimal rolling action.
   
   
5. Replacement of Mohair Seals
   The old mohair strips were removed from the door stiles and replaced with new, high-density mohair. This restored the door’s sealing ability, reducing rattling noises and preventing dust infiltration.
   
   
6. Reinstallation and Testing
   Once the repairs were complete, the doors were reinstalled and tested multiple times. Each door slid smoothly and closed securely, with proper alignment and sealing.
   
   

Outcome

The transformation was immediate. Both the front and back sliding glass doors now opened and closed effortlessly, with significantly reduced noise and friction. Staff noticed the improvement right away, no more struggling to move the doors during busy hours or worrying about them sticking on the track.

The new Comalco rollers provided a firm, stable glide action, while the fresh mohair seals improved insulation and helped keep the interior cleaner. The doors once again operated as they did when first installed, enhancing both functionality and appearance.

The business owner was extremely pleased with the result, noting how professional and efficient the Russco’s Glazing team was throughout the process.

Why Businesses Choose Russco’s Glazing

This project is a great example of how Russco’s Glazing delivers practical, high-quality solutions for commercial glass door repairs across Paget, Mackay, and surrounding areas. The team combines technical expertise with premium materials to extend the life of existing doors and windows, saving clients the cost of full replacements.

Whether it’s replacing rollers, mohairs, door locks, or entire glazing panels, Russco’s Glazing approaches every job with precision, safety, and attention to detail.

By using trusted components like Comalco sliding glass door rollers, Russco’s ensures that every repair stands the test of time, keeping Queensland businesses operating smoothly, safely, and efficiently.